Struct rkyv::net::ArchivedIpv4Addr

pub struct ArchivedIpv4Addr { /* private fields */ }

An archived Ipv4Addr.

Implementations

impl ArchivedIpv4Addr

pub const fn as_ipv4(&self) -> Ipv4Addr

Returns an Ipv4Addr with the same value.

pub const fn is_broadcast(&self) -> bool

Returns true if this is a broadcast address (255.255.255.255).

See Ipv4Addr::is_broadcast() for more details.

pub const fn is_documentation(&self) -> bool

Returns true if this address is in a range designated for documentation.

See Ipv4Addr::is_documentation() for more details.

pub const fn is_link_local(&self) -> bool

Returns true if the address is link-local (169.254.0.0/16).

See Ipv4Addr::is_link_local() for more details.

pub const fn is_loopback(&self) -> bool

Returns true if this is a loopback address (127.0.0.0/8).

See Ipv4Addr::is_loopback() for more details.

pub const fn is_multicast(&self) -> bool

Returns true if this is a multicast address (224.0.0.0/4).

See Ipv4Addr::is_multicast() for more details.

pub const fn is_private(&self) -> bool

Returns true if this is a private address.

See Ipv4Addr::is_private() for more details.

pub const fn is_unspecified(&self) -> bool

Returns true for the special ‘unspecified’ address (0.0.0.0).

See Ipv4Addr::is_unspecified() for more details.

pub const fn to_ipv6_compatible(&self) -> Ipv6Addr

Converts this address to an IPv4-compatible IPv6 address.

See Ipv4Addr::to_ipv6_compatible() for more details.

pub const fn to_ipv6_mapped(&self) -> Ipv6Addr

Converts this address to an IPv4-mapped IPv6 address.

See Ipv4Addr::to_ipv6_mapped() for more details.

impl ArchivedIpv4Addr

pub const fn octets(&self) -> [u8; 4]

Returns the four eight-bit integers that make up this address.

Trait Implementations

impl<__C: ?Sized> CheckBytes<__C> for ArchivedIpv4Addrwhere [Archived<u8>; 4]: CheckBytes<__C>,

type Error = StructCheckError

The error that may result from checking the type.

unsafe fn check_bytes<'__bytecheck>( value: *const Self, context: &mut __C ) -> Result<&'__bytecheck Self, StructCheckError>

Checks whether the given pointer points to a valid value within the given context.

impl Clone for ArchivedIpv4Addr

fn clone(&self) -> ArchivedIpv4Addr

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for ArchivedIpv4Addr

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Default for ArchivedIpv4Addr

fn default() -> ArchivedIpv4Addr

Returns the “default value” for a type.

impl<D: Fallible + ?Sized> Deserialize<Ipv4Addr, D> for ArchivedIpv4Addr

fn deserialize(&self, _: &mut D) -> Result<Ipv4Addr, D::Error>

Deserializes using the given deserializer

impl Hash for ArchivedIpv4Addr

fn hash<__H: Hasher>(&self, state: &mut __H)

Feeds this value into the given Hasher.

fn hash_slice<H>(data: &[Self], state: &mut H)where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher.

impl Ord for ArchivedIpv4Addr

fn cmp(&self, other: &ArchivedIpv4Addr) -> Ordering

This method returns an Ordering between self and other.

fn max(self, other: Self) -> Selfwhere Self: Sized,

Compares and returns the maximum of two values.

fn min(self, other: Self) -> Selfwhere Self: Sized,

Compares and returns the minimum of two values.

fn clamp(self, min: Self, max: Self) -> Selfwhere Self: Sized + PartialOrd,

Restrict a value to a certain interval.

impl PartialEq<ArchivedIpv4Addr> for Ipv4Addr

fn eq(&self, other: &ArchivedIpv4Addr) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq<Ipv4Addr> for ArchivedIpv4Addr

fn eq(&self, other: &Ipv4Addr) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq for ArchivedIpv4Addr

fn eq(&self, other: &ArchivedIpv4Addr) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialOrd<ArchivedIpv4Addr> for Ipv4Addr

fn partial_cmp(&self, other: &ArchivedIpv4Addr) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl PartialOrd<Ipv4Addr> for ArchivedIpv4Addr

fn partial_cmp(&self, other: &Ipv4Addr) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl PartialOrd for ArchivedIpv4Addr

fn partial_cmp(&self, other: &ArchivedIpv4Addr) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl Copy for ArchivedIpv4Addr

impl Eq for ArchivedIpv4Addr

impl StructuralEq for ArchivedIpv4Addr

impl StructuralPartialEq for ArchivedIpv4Addr