Struct swc_common::source_map::Span

source ·
pub struct Span {
    pub lo: BytePos,
    pub hi: BytePos,
    pub ctxt: SyntaxContext,
}
Expand description

Spans represent a region of code, used for error reporting. Positions in spans are absolute positions from the beginning of the source_map, not positions relative to SourceFiles. Methods on the SourceMap can be used to relate spans back to the original source. You must be careful if the span crosses more than one file - you will not be able to use many of the functions on spans in source_map and you cannot assume that the length of the span = hi - lo; there may be space in the BytePos range between files.

Fields§

§lo: BytePos§hi: BytePos§ctxt: SyntaxContext

Information about where the macro came from, if this piece of code was created by a macro expansion.

Implementations§

source§

impl Span

source

pub fn lo(self) -> BytePos

source

pub fn new(lo: BytePos, hi: BytePos, ctxt: SyntaxContext) -> Self

source

pub fn with_lo(&self, lo: BytePos) -> Span

source

pub fn hi(self) -> BytePos

source

pub fn with_hi(&self, hi: BytePos) -> Span

source

pub fn ctxt(self) -> SyntaxContext

source

pub fn with_ctxt(&self, ctxt: SyntaxContext) -> Span

source

pub fn is_dummy(self) -> bool

Returns true if this is a dummy span with any hygienic context.

source

pub fn is_dummy_ignoring_cmt(self) -> bool

Returns true if this is a dummy span with any hygienic context.

source

pub fn shrink_to_lo(self) -> Span

Returns a new span representing an empty span at the beginning of this span

source

pub fn shrink_to_hi(self) -> Span

Returns a new span representing an empty span at the end of this span

source

pub fn substitute_dummy(self, other: Span) -> Span

Returns self if self is not the dummy span, and other otherwise.

source

pub fn contains(self, other: Span) -> bool

Return true if self fully encloses other.

source

pub fn source_equal(self, other: Span) -> bool

Return true if the spans are equal with regards to the source text.

Use this instead of == when either span could be generated code, and you only care that they point to the same bytes of source text.

source

pub fn trim_start(self, other: Span) -> Option<Span>

Returns Some(span), where the start is trimmed by the end of other

source

pub fn to(self, end: Span) -> Span

Return a Span that would enclose both self and end.

source

pub fn between(self, end: Span) -> Span

Return a Span between the end of self to the beginning of end.

source

pub fn until(self, end: Span) -> Span

Return a Span between the beginning of self to the beginning of end.

source

pub fn from_inner_byte_pos(self, start: usize, end: usize) -> Span

source

pub fn apply_mark(self, mark: Mark) -> Span

source

pub fn remove_mark(&mut self) -> Mark

source

pub fn private(self) -> Span

source

pub fn adjust(&mut self, expansion: Mark) -> Option<Mark>

source

pub fn glob_adjust( &mut self, expansion: Mark, glob_ctxt: SyntaxContext ) -> Option<Option<Mark>>

source

pub fn reverse_glob_adjust( &mut self, expansion: Mark, glob_ctxt: SyntaxContext ) -> Option<Option<Mark>>

source

pub fn has_mark(self, mark: Mark) -> bool

Returns true if self is marked with mark.

Panics if mark is not a valid mark.

source

pub fn dummy_with_cmt() -> Self

Dummy span, both position are extremely large numbers so they would be ignore by sourcemap, but can still have comments

Trait Implementations§

source§

impl Archive for Span

§

type Archived = ArchivedSpan

The archived representation of this type. Read more
§

type Resolver = SpanResolver

The resolver for this type. It must contain all the additional information from serializing needed to make the archived type from the normal type.
source§

unsafe fn resolve( &self, pos: usize, resolver: Self::Resolver, out: *mut Self::Archived )

Creates the archived version of this value at the given position and writes it to the given output. Read more
source§

impl Clone for Span

source§

fn clone(&self) -> Span

Returns a copy of the value. Read more
1.0.0 · source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
source§

impl Debug for Span

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
source§

impl Default for Span

source§

fn default() -> Self

Returns the “default value” for a type. Read more
source§

impl<'de> Deserialize<'de> for Span

source§

fn deserialize<__D>(__deserializer: __D) -> Result<Self, __D::Error>
where __D: Deserializer<'de>,

Deserialize this value from the given Serde deserializer. Read more
source§

impl<__D: Fallible + ?Sized> Deserialize<Span, __D> for Archived<Span>

source§

fn deserialize(&self, deserializer: &mut __D) -> Result<Span, __D::Error>

Deserializes using the given deserializer
source§

impl EqIgnoreSpan for Span

source§

fn eq_ignore_span(&self, _: &Self) -> bool

Always returns true

source§

impl From<(BytePos, BytePos)> for Span

source§

fn from(sp: (BytePos, BytePos)) -> Self

Converts to this type from the input type.
source§

impl From<Span> for (BytePos, BytePos)

source§

fn from(sp: Span) -> Self

Converts to this type from the input type.
source§

impl From<Span> for MultiSpan

source§

fn from(span: Span) -> MultiSpan

Converts to this type from the input type.
source§

impl Hash for Span

source§

fn hash<__H: Hasher>(&self, state: &mut __H)

Feeds this value into the given Hasher. Read more
1.3.0 · source§

fn hash_slice<H>(data: &[Self], state: &mut H)
where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher. Read more
source§

impl Ord for Span

source§

fn cmp(&self, other: &Span) -> Ordering

This method returns an Ordering between self and other. Read more
1.21.0 · source§

fn max(self, other: Self) -> Self
where Self: Sized,

Compares and returns the maximum of two values. Read more
1.21.0 · source§

fn min(self, other: Self) -> Self
where Self: Sized,

Compares and returns the minimum of two values. Read more
1.50.0 · source§

fn clamp(self, min: Self, max: Self) -> Self
where Self: Sized + PartialOrd,

Restrict a value to a certain interval. Read more
source§

impl PartialEq for Span

source§

fn eq(&self, other: &Span) -> bool

This method tests for self and other values to be equal, and is used by ==.
1.0.0 · source§

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
source§

impl PartialOrd for Span

source§

fn partial_cmp(&self, other: &Span) -> Option<Ordering>

This method returns an ordering between self and other values if one exists. Read more
1.0.0 · source§

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator. Read more
1.0.0 · source§

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator. Read more
1.0.0 · source§

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator. Read more
1.0.0 · source§

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator. Read more
source§

impl<__S: Fallible + ?Sized> Serialize<__S> for Span

source§

fn serialize(&self, serializer: &mut __S) -> Result<Self::Resolver, __S::Error>

Writes the dependencies for the object and returns a resolver that can create the archived type.
source§

impl Serialize for Span

source§

fn serialize<__S>(&self, __serializer: __S) -> Result<__S::Ok, __S::Error>
where __S: Serializer,

Serialize this value into the given Serde serializer. Read more
source§

impl Spanned for Span

source§

fn span(&self) -> Span

Get span of self.
source§

fn span_lo(&self) -> BytePos

source§

fn span_hi(&self) -> BytePos

source§

impl Take for Span

source§

fn dummy() -> Self

Create a dummy value of this type.
source§

fn take(&mut self) -> Self

source§

fn map_with_mut<F>(&mut self, op: F)
where F: FnOnce(Self) -> Self,

Mutate self using op, which accepts owned data.
source§

impl TypeEq for Span

source§

fn type_eq(&self, _: &Self) -> bool

Always returns true

source§

impl Copy for Span

source§

impl Eq for Span

source§

impl StructuralPartialEq for Span

Auto Trait Implementations§

§

impl RefUnwindSafe for Span

§

impl Send for Span

§

impl Sync for Span

§

impl Unpin for Span

§

impl UnwindSafe for Span

Blanket Implementations§

source§

impl<T> Any for T
where T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
§

impl<T> ArchivePointee for T

§

type ArchivedMetadata = ()

The archived version of the pointer metadata for this type.
§

fn pointer_metadata( _: &<T as ArchivePointee>::ArchivedMetadata ) -> <T as Pointee>::Metadata

Converts some archived metadata to the pointer metadata for itself.
§

impl<T> ArchiveUnsized for T
where T: Archive,

§

type Archived = <T as Archive>::Archived

The archived counterpart of this type. Unlike Archive, it may be unsized. Read more
§

type MetadataResolver = ()

The resolver for the metadata of this type. Read more
§

unsafe fn resolve_metadata( &self, _: usize, _: <T as ArchiveUnsized>::MetadataResolver, _: *mut <<T as ArchiveUnsized>::Archived as ArchivePointee>::ArchivedMetadata )

Creates the archived version of the metadata for this value at the given position and writes it to the given output. Read more
§

unsafe fn resolve_unsized( &self, from: usize, to: usize, resolver: Self::MetadataResolver, out: *mut RelPtr<Self::Archived, <isize as Archive>::Archived> )

Resolves a relative pointer to this value with the given from and to and writes it to the given output. Read more
source§

impl<T> Borrow<T> for T
where T: ?Sized,

source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
§

impl<T> CallHasher for T
where T: Hash + ?Sized,

§

default fn get_hash<H, B>(value: &H, build_hasher: &B) -> u64
where H: Hash + ?Sized, B: BuildHasher,

§

impl<T> Conv for T

§

fn conv<T>(self) -> T
where Self: Into<T>,

Converts self into T using Into<T>. Read more
§

impl<F, W, T, D> Deserialize<With<T, W>, D> for F
where W: DeserializeWith<F, T, D>, D: Fallible + ?Sized, F: ?Sized,

§

fn deserialize( &self, deserializer: &mut D ) -> Result<With<T, W>, <D as Fallible>::Error>

Deserializes using the given deserializer
source§

impl<Q, K> Equivalent<K> for Q
where Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,

source§

fn equivalent(&self, key: &K) -> bool

Compare self to key and return true if they are equal.
§

impl<T> FmtForward for T

§

fn fmt_binary(self) -> FmtBinary<Self>
where Self: Binary,

Causes self to use its Binary implementation when Debug-formatted.
§

fn fmt_display(self) -> FmtDisplay<Self>
where Self: Display,

Causes self to use its Display implementation when Debug-formatted.
§

fn fmt_lower_exp(self) -> FmtLowerExp<Self>
where Self: LowerExp,

Causes self to use its LowerExp implementation when Debug-formatted.
§

fn fmt_lower_hex(self) -> FmtLowerHex<Self>
where Self: LowerHex,

Causes self to use its LowerHex implementation when Debug-formatted.
§

fn fmt_octal(self) -> FmtOctal<Self>
where Self: Octal,

Causes self to use its Octal implementation when Debug-formatted.
§

fn fmt_pointer(self) -> FmtPointer<Self>
where Self: Pointer,

Causes self to use its Pointer implementation when Debug-formatted.
§

fn fmt_upper_exp(self) -> FmtUpperExp<Self>
where Self: UpperExp,

Causes self to use its UpperExp implementation when Debug-formatted.
§

fn fmt_upper_hex(self) -> FmtUpperHex<Self>
where Self: UpperHex,

Causes self to use its UpperHex implementation when Debug-formatted.
§

fn fmt_list(self) -> FmtList<Self>
where &'a Self: for<'a> IntoIterator,

Formats each item in a sequence. Read more
source§

impl<T> From<T> for T

source§

fn from(t: T) -> T

Returns the argument unchanged.

§

impl<T> Instrument for T

§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided [Span], returning an Instrumented wrapper. Read more
§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
source§

impl<T, U> Into<U> for T
where U: From<T>,

source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

§

impl<T> LayoutRaw for T

§

fn layout_raw(_: <T as Pointee>::Metadata) -> Result<Layout, LayoutError>

Gets the layout of the type.
§

impl<T> Pipe for T
where T: ?Sized,

§

fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> R
where Self: Sized,

Pipes by value. This is generally the method you want to use. Read more
§

fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> R
where R: 'a,

Borrows self and passes that borrow into the pipe function. Read more
§

fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> R
where R: 'a,

Mutably borrows self and passes that borrow into the pipe function. Read more
§

fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> R
where Self: Borrow<B>, B: 'a + ?Sized, R: 'a,

Borrows self, then passes self.borrow() into the pipe function. Read more
§

fn pipe_borrow_mut<'a, B, R>( &'a mut self, func: impl FnOnce(&'a mut B) -> R ) -> R
where Self: BorrowMut<B>, B: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.borrow_mut() into the pipe function. Read more
§

fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> R
where Self: AsRef<U>, U: 'a + ?Sized, R: 'a,

Borrows self, then passes self.as_ref() into the pipe function.
§

fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> R
where Self: AsMut<U>, U: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.as_mut() into the pipe function.
§

fn pipe_deref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R
where Self: Deref<Target = T>, T: 'a + ?Sized, R: 'a,

Borrows self, then passes self.deref() into the pipe function.
§

fn pipe_deref_mut<'a, T, R>( &'a mut self, func: impl FnOnce(&'a mut T) -> R ) -> R
where Self: DerefMut<Target = T> + Deref, T: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.deref_mut() into the pipe function.
§

impl<T> Pointee for T

§

type Metadata = ()

The type for metadata in pointers and references to Self.
§

impl<T, S> SerializeUnsized<S> for T
where T: Serialize<S>, S: Serializer + ?Sized,

§

fn serialize_unsized( &self, serializer: &mut S ) -> Result<usize, <S as Fallible>::Error>

Writes the object and returns the position of the archived type.
§

fn serialize_metadata(&self, _: &mut S) -> Result<(), <S as Fallible>::Error>

Serializes the metadata for the given type.
§

impl<T> Tap for T

§

fn tap(self, func: impl FnOnce(&Self)) -> Self

Immutable access to a value. Read more
§

fn tap_mut(self, func: impl FnOnce(&mut Self)) -> Self

Mutable access to a value. Read more
§

fn tap_borrow<B>(self, func: impl FnOnce(&B)) -> Self
where Self: Borrow<B>, B: ?Sized,

Immutable access to the Borrow<B> of a value. Read more
§

fn tap_borrow_mut<B>(self, func: impl FnOnce(&mut B)) -> Self
where Self: BorrowMut<B>, B: ?Sized,

Mutable access to the BorrowMut<B> of a value. Read more
§

fn tap_ref<R>(self, func: impl FnOnce(&R)) -> Self
where Self: AsRef<R>, R: ?Sized,

Immutable access to the AsRef<R> view of a value. Read more
§

fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Self
where Self: AsMut<R>, R: ?Sized,

Mutable access to the AsMut<R> view of a value. Read more
§

fn tap_deref<T>(self, func: impl FnOnce(&T)) -> Self
where Self: Deref<Target = T>, T: ?Sized,

Immutable access to the Deref::Target of a value. Read more
§

fn tap_deref_mut<T>(self, func: impl FnOnce(&mut T)) -> Self
where Self: DerefMut<Target = T> + Deref, T: ?Sized,

Mutable access to the Deref::Target of a value. Read more
§

fn tap_dbg(self, func: impl FnOnce(&Self)) -> Self

Calls .tap() only in debug builds, and is erased in release builds.
§

fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self

Calls .tap_mut() only in debug builds, and is erased in release builds.
§

fn tap_borrow_dbg<B>(self, func: impl FnOnce(&B)) -> Self
where Self: Borrow<B>, B: ?Sized,

Calls .tap_borrow() only in debug builds, and is erased in release builds.
§

fn tap_borrow_mut_dbg<B>(self, func: impl FnOnce(&mut B)) -> Self
where Self: BorrowMut<B>, B: ?Sized,

Calls .tap_borrow_mut() only in debug builds, and is erased in release builds.
§

fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Self
where Self: AsRef<R>, R: ?Sized,

Calls .tap_ref() only in debug builds, and is erased in release builds.
§

fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Self
where Self: AsMut<R>, R: ?Sized,

Calls .tap_ref_mut() only in debug builds, and is erased in release builds.
§

fn tap_deref_dbg<T>(self, func: impl FnOnce(&T)) -> Self
where Self: Deref<Target = T>, T: ?Sized,

Calls .tap_deref() only in debug builds, and is erased in release builds.
§

fn tap_deref_mut_dbg<T>(self, func: impl FnOnce(&mut T)) -> Self
where Self: DerefMut<Target = T> + Deref, T: ?Sized,

Calls .tap_deref_mut() only in debug builds, and is erased in release builds.
source§

impl<T> ToOwned for T
where T: Clone,

§

type Owned = T

The resulting type after obtaining ownership.
source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
§

impl<T> TryConv for T

§

fn try_conv<T>(self) -> Result<T, Self::Error>
where Self: TryInto<T>,

Attempts to convert self into T using TryInto<T>. Read more
source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

§

type Error = Infallible

The type returned in the event of a conversion error.
source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
§

impl<T> WithSubscriber for T

§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a [WithDispatch] wrapper. Read more
§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a [WithDispatch] wrapper. Read more
source§

impl<T> DeserializeOwned for T
where T: for<'de> Deserialize<'de>,